Mellanox Technologies MSX1012B-2BFS User Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 86
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
SwitchX®-2 12 Port Ethernet Switch System Hardware User Manual Rev 1.0
Mellanox Technologies
25
3Installation
Installation and initialization of the switch platform are straightforward processes, requiring
attention to the normal mechanical, power, and thermal precautions for rack-mounted equipment.
The switch platform can be rack mounted and is designed for installation in a standard 19”
rack.The switch platform contains auto-sensing 100 - 240 VAC connections for all possible PS
units.
The installer should use a rack capable of supporting the mechanical and environmental charac-
teristics of a fully populated platform.
3.1 Installation Safety Warnings
For Safety Warnings in French see “Avertissements de sécurité pour l'installation (French)” on
page 58, for German “Installation – Sicherheitshinweise(German)” on page 63, for Spanish see
“Advertencias de seguridad de instalación(Spanish)” on page 67 for Russian see
Предупреждения по технике безопасности при установке(Russian)” on page 72, for Roma-
nian see “Avertismente privind siguranţa la instalare (Romanian)” on page 77, and for Chinese
see page 82.
1. Installation Instructions
2. Installation in Restricted Access Location
3. Over-temperature
4. Stacking the Chassis
The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Take
precautions to guarantee proper ventilation in order to maintain good airflow at ambi
-
ent temperature. Cable routing in particular should not impede the air flow through
the
switch .
Read all installation instructions before connecting the equipment to the power
source.
This unit is intended for installation in a Restricted Access Location.
This equipment should not be operated in an area with an ambient temperature
exceeding the maximum recommended: 45°C (113°F). Moreover, to guarantee
proper air flow, allow at least 8cm (3 inches) of clearance around the ventilation
openings.
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 85 86

Comments to this Manuals

No comments